Researchers from the University of Toronto, the University of Kentucky, EPFL, North Carolina State University and Northwestern University have designed a perovskite solar cell that can stand up to high temperatures for more than 1,500 hours — an important achievement on the to commercialization.
“Perovskite solar cells offer new pathways to overcome some of the efficiency limitations of silicon-based technology, which is the industrial standard today,” said Ted Sargent, professor of electrical and computer engineering at the McCormick School of Engineering, professor of chemistry in the Weinberg College of Arts and Sciences, and a former professor at the University of Toronto. “But due to its multi-decade head start, silicon still has an advantage in some areas, including stability. This study shows how we can close that gap.”
Over the past few years, advances from Sargent’s lab and others have brought the efficiency of perovskite solar cells to within the same range as what is achievable with silicon. However, the challenge of stability has received comparatively less attention.
“We wanted to work at high temperatures and high relative humidity, because that would give us a better idea of which components might fail first, and how to improve them,” said Somin Park, a postdoctoral fellow in Sargent’s lab and one of the paper’s three co-lead authors. “We combined our expertise in materials discovery, spectroscopy, and device fabrication to design and characterize a new surface coating for the surface of the perovskites. Our data showed that it is this coating, made with fluorinated ammonium ligands, that enhances the stability of the overall cell.”
Perovskite solar cells typically contain a passivation layer, which surrounds the light-absorbing perovskite layer and acts as a conduit for electrons to move into the surrounding circuit. But depending on its composition, as well as its exposure to heat and humidity, the passivation layer can deform in ways that impede the flow of electrons.
“Many groups use passivation layers made with bulky ammonium ions, a nitrogen-containing organic molecule,” said Mingyang Wei, a postdoctoral fellow from École Polytechnique Fédérale de Lausanne and co-lead author on the paper. “Even though they form stable 2D structures at room temperature, these passivation layers can degrade at elevated temperatures, due to their intermixing with underlying perovskites. What we did was replace typical ammonium ions with 3,4,5-trifluoroanilinium. This new passivation layer does not intercalate into the structure of the perovskite crystals, making it thermally stable.”
“A typical value for a perovskite cell like this would be more like 500 hours,” Park said. “There are some teams who have reported measurements of more than 1,000 hours, but not at temperatures as high as this. Our design is a big improvement, and we were really excited to see that it worked this well.”
The team then tested the performance of the cells using continuous measurements at a temperature of 85 degrees Celsius (185 degrees Fahrenheit), a relative humidity of 50 percent, maximum power point tracking, and an illumination equivalent to full sunlight. In the paper, they report a T85 — the amount of time it takes for the cell’s performance to degrade to 85 percent of its original value — of 1,560 hours.
Park says the team’s passivation layer could be combined with other innovations, such as double or triple-junction designs, to further enhance perovskite solar cell performance.
“We still have a long way to go before we can fully replicate the performance of silicon, but the progress in this field has been very rapid over the last few years,” Park said. “We’re moving in the right direction, and this study will hopefully point the way forward for others.”
